An exterior quality, fine texture emulsion paint based on an all acrylic resin. It contains a fungicide to inhibit mould growth on the paint film. The formulation gives an attractive fine granular finish and allows a higher build.

- Helps bridge fine hairline cracks

- Contains a fungicide and algicide to resist disfiguring surface growths on its surface

- For a textured finish on exterior walls, including blockwork, concrete, stonework, cement rendering, roughcast, pebbledash & brick

Pack Size:

5L

Colour Range:

White

Coverage:

On smooth surfaces of low porosity: 6-8m2 per litre On textured surfaces of low porosity: 3-4m2 per litre. These figures are only an approximate guide.

Touch dry:

1-2 hours dependent upon temperature and humidity.

Recoatable:

2-4 hours

Application Method:

Brush, roller or spray

Thinning:

For sealing new or bare surfaces, 1 part clean water to 5 parts paint. For normal use: thinning should not exceed 1 part clean water to 10 parts paint.

System Information:

To get the best results make sure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry).

Seal new or bare surfaces with a thinned first coat of Dulux Trade Weathershield Textured Masonry Paint (up to 1 part clean water to 5 parts paint). The normal finishing process is 2 full coats of Dulux Trade Weathershield Textured Masonry Paint, but on previously painted surfaces in good condition, where similar colours are used, 1 coat may be sufficient.

After use, remove as much paint as possible from brushes before cleaning with clean water.